The GTR55 is a multisystem/multifrequency GNSS (Global Navigation Satellite System) receiver intended for time and frequency transfer. The receiver supports both code and carrier phase measurements. Thanks to large receiver bandwidth and advanced signal processing, even the code measurements provide sub-nanosecond accuracy. The built-in calibrator measures continuously the internal delays of all supported signals ensuring high long-term stability. The receiver can be directly connected to a local net or internet which allows remote control and output data download and upload.

PN (RN): 2065.100.30

Operation

The operation is fully automatic. After the very first configuration, the receiver continuously collects the measurement data. Output files in several standard/proprietary formats can be generated from the collected data. The data processing can be started manually or by a scheduler which enables routine processing at given times (daily, weekly, ...). The resulting data files can be downloaded from the receiver, automatically uploaded to a server or automatically saved to an external disk. A brief message is sent to an e-mail address after the processing is finished. The output measurement data can be referenced to the input 1PPS and/or to the output 1PPS time mark.

 

Remote control

The receiver can be controlled from any computer on the net. The User Interface has the form of a web page which can be accessed using a web browser. It enables control of the receiver, monitoring of the receiver operation, and download of the measurement data. Authorization is required to access the receiver.

 

Diagnostic system

The diagnostic system indicates several dozens of operational events and states. The diagnostic messages can be recorded in the log, displayed in the User Interface, and sent to an e-mail address.

 

Monitoring with graphical representation

History of operational parameters (time difference, temperature, satellite elevation/azimuth, ...) is displayed in graphs in the User Interface.

TIME REFERENCE INPUT
Input signal 1PPS (leading edge)
Input impedance 50 Ω
Trigger level 0 V-2.5 V adjustable
Max level 5.5 V/50 Ω
Min level -0.1 V/50 Ω
The 1PPS time mark must be coherent with the frequency reference at the 10 MHz input.
TIME REFERENCE OUTPUT
Output signal 1PPS (leading edge)
Low level <0.05 V/50 Ω
High level >1.8 V/50 Ω
FREQUENCY REFERENCE INPUT
Input signal 10 MHz
Input impedance 50 Ω
Max level 3 Vpp/50 Ω
Min level 0.5 Vpp/50 Ω
PRECISION
Code measurement < 0.3 ns RMS (CGGTTS data, short-baseline common view)
Phase measurement < 15 ps RMS (short-baseline common view)
OUTPUT DATA FORMATS
CGGTTS all tracks/all satellites in view, MSIO iono-delay, versions 01, 02, 2E
RINEX observation/navigation files, versions 2.10 (GPS only), 2.11, 3.01 and 3.03
RAW proprietary format, all signals, both code and carrier phase data, GPS, GLONASS, GALILEO, BeiDou, NAVIC, SBAS
L3P_30s standard P3 data, 30 s sampling period, version 02, 2E
L3P_1s P3 data, 1 s sampling period, version 02, 2E
ESA P3 data, 5 min
1PPS_DIF proprietary format, REF_IN - REF_OUT difference
EL_MASK CNR analysis and search for obstacles
STAT statistics of collected measurement data
The output measurement data can be referenced to the input 1PPS and/or to the output 1PPS time reference.
GNSS RECEIVER
Supported signals
GPS: L1C/A, L1C, L1P, L2C, L2P, L5
GLONASS: L1OF, L1SF, L2OF, L2SF, L3OC
GALILEO: E1, E5a, E5b, E5 AltBOC, E6
BeiDou: B1, B2, B3, BeiDou-3 ready
NAVIC: L5
SBAS: L1, L5
Type of measurement code/carrier phase referenced to input/output time reference
Receiver bandwidth up to 60 MHz
Number of satellites all in view
Built-in calibrator measures continuously the internal delays of all supported signals including GLONASS inter-channel biases ensuring low temperature dependence and high long-term stability.
Dimensions 19“/2U standard chassis
Power supply 100 V-240 V AC/50 Hz-60 Hz
Operating temperature 0 ºC to +50 ºC
ANTENNA
Antenna supply 5 V/up to 90 mA (plus on inner contact)
Recommended antenna Novatel GNSS-850
GTR55 operating instructions 2065.010.32
Switch display: Catalog / List
Sort by

GTR55 - Time and frequency transfer GNSS receiver set

PN (RN): 2065.000.30

Set consists of GTR55 receiver (2065.100.30) and accessories. The GTR55 is a multisystem/multifrequency GNSS (Global Navigation Satellite...